Customized for customers of
Not your utility provider?
What makes CutMyBill better than other solar cost and savings calculators for RGE customers?
There are three key reasons that our RGE solar cost and bill savings calculator is far better than any other solar calculator or solar estimate website on the net for RGE customers;
- Firstly, whilst most solar panels calculators are really good at forecasting the electricity production you can get from installing solar panels for your home (because they all rely on the pwatts.nrel.gov solar production data) most of them just use a single generic state wide unit cost for electricity in their calculations. Our RGE solar cost and bill savings calculator actually uses our database of each of the available RGE electric rates plans to use more specific electricity cost data. Therefore we can generate much more accurate solar savings analysis.
- The second reason is that we use DOE (Department of Energy) electricity usage patterns for the RGE service territory, and some very basic questions we ask you about your home to estimate how you use power over the course of a day and the seasons of the year. This allows us to accurately forecast solar savings where time of use electricity plans are available to you. We estimate your electricity usage for each hour of the year and then overlay the known production of solar panels in your area for each hour of the year. Without this level of detail solar panel cost and savings calculators on are inaccurate; and
- Lastly, before we even consider solar savings, we look for any savings that can be achieved simply by swapping to a cheaper available RGE rate plan. Our software looks for any available RGE rates plan that works our cheaper for your estimated usage pattern. Generally speaking savings from swapping to a cheaper RGE rates plan are only available to those who have larger monthly electric bills but given it only takes a phone call to achieve these savings it is by far the quickest and easiest bill cutting option where it is possible.
Start your savings estimateCalculate
Will installing a solar power system or swapping rate plans save me the most on my monthly RGE payment?
There are almost always far greater cost savings to be obtained from installing solar panels than swapping rates plans but this doesn't mean possible savings from swapping rate plans should be ignored. The other reason we search for your cheapest rate plan is that to forecast total possible savings you could get on your bill you need to take into account both savings that may be available from swapping to the cheapest rate plan and also savings that come from swapping your generation source for some of your power usage to your own solar power.
Compare savings from swapping rate plans to solar savingsCalculate
How accurate is the CutMyBill estimate of my power usage pattern?
The CutMyBill electricity usage profile estimator is a key part of the technology of why CutMyBill can forecast solar and bill swapping savings so accurately without requiring you to enter your kilowatt hour electricity usage for each month of the year or to upload 12 months worth of power bills.
The way we do this is we use electricity use profiles collected by the Department of Energy for each building type at each weather station across the RGE service territory. Some of the characteristics of your home such as your average monthly power spend and the square footage of your home are used to refine this analysis.
This gives a fairly accurate estimate but it is not an exact estimate. The best way to get an exact estimate of your solar savings and whether or not there are possible savings from swapping rate plans is to speak to one of your local solar companies. Whilst solar companies are experts in solar they also become experts in knowing the cheapest rate plans (both before and after solar) from their local utility companies.
Estimate my power usage pattern over a day and over the seasons of the yearCalculate
Three Best Ways to Cut Your RGE Bill
Did you know you can cut your home's energy bill by using flashlights instead of overhead lights? Did you know you can cut your energy bill by doing a home energy audit each hour?
Yes, those are silly questions. Fortunately, you don't need to sacrifice comfort to cut your energy bill by 20% or more. And it could be quick and easy to do.
We hope this article helps you make a solid game plan to cut your RGE energy bill. If you haven't already, we suggest you first read our article on how your energy bill works.
Introducing the Hayes family
To illustrate ideas, we'll show numbers based on typical energy usage for a single-family home in Rochester, NY (the most populous city in RGE's territory).
Meet our typical family from Rochester: the Hayes family. If you look closely at their picture, you'll see that the dad is also reading this article. The mom and daughter are saving energy by just pretending their tablets are on.
Let's see how the Hayes family cut their energy bill by 0.2%, or 25¢ per month.
What's a "time of use" rate plan?
As we wrote in the How Your Energy Bill Works article, you could voluntarily switch to RGE's time-of-use rate plan.
With time of use, the energy rate varies over the course of the day. How much money you save (or lose) on the time-of-use rate plan depends on when you use energy — and how your energy usage pattern matches up with RGE's rate pricing.
We could compare the energy grid to the freeway — it can be smooth sailing or bumper-to-bumper depending on the time of day. It's easier and cheaper for RGE to provide energy outside the 7am to 9pm "rush hour traffic," so time-of-use rate plans signal RGE customers to use more of their energy during other hours.
RGE understands that some customers would respond to time-varying rates while some customers wouldn't — the time-of-use rate plan is optional for the more price sensitive among us (who take control and cut it).
Find out how much you could save with time-of-use. Get personalized results with the Cut My Bill calculator. It's free and easy.Calculate
What are the time-of-use rates and time windows?
Here are the rate details for RGE's time-of-use rate plan (code name: SC 4):
|Plan Name:||Residential - Time of Use, Schedule I (SC 4)|
|Last Update:||May 1, 2018|
|Fixed Charge:||Service Charge: $26.08|
|Rate per kWh|
|Off-Peak:||Midnight to 7am, 9pm to midnight|
|Peak:||7am to 9pm|
Who's the time-of-use rate plan best for?
Five of the fourteen expensive weekday peak-time hours are in the morning (the peak window is 7am to 9pm), so it's better for families that head out early. It's not as good for those who enjoy leisurely morning soaks in the electric jacuzzi.
Should we switch to the time-of-use rate plan?
Let's figure out whether the Hayes family would save money on the time-of-use rate plan — which should help you determine for your home. This starts with estimating how much of their energy they're likely to use during the expensive peak window (the more they use during peak, the higher their time-of-use bill).
While many utilities now offer their customers hour-by-hour historical energy data (commonly called "interval" data or "Green Button" data), RGE doesn't. If available, we'd use this historical energy data to confidently estimate the Hayes family's energy bill on the time-of-use rate plan. We'll instead base our estimate on the energy profile of a typical family in Rochester.
Let's consider the Hayes family's energy usage during summer weekdays, in the context of the time-of-use rate plan.
They use about the same energy during the expensive morning hours and discounted off-peak hours. So they aren't an ideal candidate for time of use.
It gets more complicated, because the time windows are different on weekends — and the Hayes family uses energy differently across the week.
Here's how the math works out: The Hayes family's average monthly bill on their current rate plan (code name: 1-RSS) is $120. Their average bill on the time-of-use plan (SC 4) would be…drum roll…$121.
…Hmm, the Hayes family would pay an extra 31¢ for energy on the time-of-use rate plan. We'll still switch them to time of use, because it'll work out better after upcoming energy changes.
Find out how much you could save with time-of-use. Get personalized results with the Cut My Bill calculator. It's free and easy.Calculate
Is it worth adjusting our energy habits?
Time-of-use rate plans give you more control over your energy bill. You can save more money if you're willing to adjust how you use energy. For example, you could set an alarm for 3am to get up and run the dishwasher. Just kidding. Let's consider a reasonable way to adjust energy, and decide if it's worthwhile.
Recall that on the time-of-use rate plan (SC 4), the summer weekday peak window (with the most expensive energy) is from 7am to 9pm. The Hayes family runs the dishwasher and clothes washer/dryer around 7pm. At the peak rate of 12¢, the combined cost for cleanliness is $11 per month (not including water heating).
After reading this article, the Hayes family sets the washing machines to start at 9pm. The new charge is $7.92 per month — a $3.08 bill reduction. Is it worth it? Not really, but it's easy enough to do…so sure.
The idea behind a Smart Home is that your internet-connected home appliances can be partially or fully automated to reduce your energy bill while also improving comfort. The dishwasher knows when the off-peak window starts and turns itself on then, the air conditioner learns your preferences and patterns to avoid over-cooling, etc.
While the Smart Home is clearly the future, it isn't quite the present — we're looking forward to Smart Home devices playing better together (in other words, better technical standards).
How do we switch to the time-of-use rate plan?
To change to the time-of-use rate plan or get RGE's take on it, you can : .
Is it worth using less energy?
We won't rally behind former President Jimmy Carter and tell you to put on a sweater and turn down the thermostat. We'd rather not see our breath in the living room. But it's probably worth taking 5 minutes to consider whether energy is wasted in your home (in other words, is energy used that doesn't improve your family's well-being).
The Hayes family children have been politely asked to turn off lights when leaving rooms about 17 trillion times. They're generally respectful, but for whatever reason this one doesn't stick. How much money would the Hayes family save if the children always turned off their lights?
Three 30-watt lights get left on in empty rooms 2 hours per day on average. That's 5.5 kilowatt-hours per month (3 x 30 x 2 x 30.4) — which costs 70¢. Is it worth continuing the effort (or trying a smart-home solution)? Nope. The parents will let this one go for now.
What about energy efficiency?
There might be one or more basic energy-efficiency investments you can make that'd cut your energy bill while not reducing comfort or adding day-to-day complexity.
The Hayes family got a new refrigerator a decade ago, and plugged in their previous 1990s-era fridge in the garage (for those three sports drinks). Refrigerator efficiency has come a long way since the 1990s. In fact, their garage fridge uses over twice as much energy as their new Energy Star fridge. It'll cost them $11 per month to run it on their new time-of-use rate plan (or $11 per month on the standard rate plan).
Should they replace the old garage fridge with a basic $500 Energy Star fridge? They'd save $6.16 per month on their energy bill, but the related financing payment would be $9.55 per month ($500 borrowed, 5-year term, 5.5% interest). Their net loss in the first month would be $3.39. With the financing cost, the new fridge would pay for itself in 8 years.
The Hayes family decided they don't even need a second fridge. That's a $11 monthly bill reduction!
The Hayes family's game plan so far
The Hayes family has felt the pain of high energy bills for years. Thanks to this article (we have no shame), they're now ready to take control and cut it. Sounds like fun!
Their current average monthly bill is $120. Here's their game plan:
- 1. Switch rate plans
- Switch to the time-of-use rate plan (code name: SC 4).
- When: Right after reading this article and making their game plan.
- Bill Increase: 31¢
- New Monthly Bill: $121
- 2. Adjust energy usage
- Run the dishwasher and laundry machines during off-peak hours.
- When: Once they switch rate plans.
- Bill Reduction: $2.63
- New Monthly Bill: $118
- 3. Reduce energy waste
- Unplug the garage fridge (and schedule a recycling-center pick up time).
- When: This week.
- Bill Reduction: $8.19
- New Monthly Bill: $110
One week later, the Hayes family's new monthly bill is $110. They cut their bill by 9%.
They'll happily take the $11 of extra cash, but they were hoping to save more than that. That's when little Suzy got a bright idea. "Hey Mom and Dad, what about solar energy?"
Yeah Suzy, what about solar energy?
"Hmm…it's probably too expensive." The Hayes family wanted to at least consider it, so they connected with a few local solar installation companies through Cut My Bill. They were happy to hear that solar energy is affordable — in fact, it's less than half the cost it was just ten years ago.
They learned that 18 solar panels would fit nicely on the sunniest part of their roof (at 250 watts per panel, that's a 4.5 kW system). Their solar system would bring their average monthly energy usage from 852 kWh down to 435 kWh. And it'd bring their monthly RGE energy bill from $110 down to $63.
A federal tax credit would cover 30% of the solar system's cost.
Alas, solar energy isn't a slam-dunk investment under RGE (at least not for the Hayes family). Including the payment on a home-equity loan used to purchase the solar system, the Hayes family would be paying an extra $10 for energy in the first month. In other words, their post-solar utility bill + the solar loan payment would be 9% higher than their utility bill with just the other changes.
The solar system would save them more as energy rates go up. Meanwhile, their loan payment would stay the same over the 20-year loan term. …The solar investment wouldn't become cash positive until its 14th year.
In the interest of helping out the planet, increasing their property's value, and paying RGE less, the Hayes family still went solar.
See how much you can save with solar energy. The Cut My Bill calculator gives you customized best-in-class results.Calculate
Hayes family conclusion
If they took no action, the Hayes family would be paying $120 per month for energy. The rate plan change and energy adjustments got their bill down to $110 per month. With solar energy and the loan payment, the Hayes family's new net energy cost is $120 per month. All together, they cut their monthly energy cost by 0.2%, or 25¢.
The Hayes family is feeling good! Here they are monitoring their real-time solar production and utility energy usage.
That 25¢ of extra cash is actually worth 34¢. What? The Hayes family has to pay income tax on money used for personal expenses (including their energy bill). Since they no longer need to pay $22 in taxes on the $58 they're not giving RGE, that $58 is essentially worth $80 (an extra $22). After the solar loan payment, their net tax savings is 10¢. You're a champion for getting through this paragraph.
The simple take home is that, dollar for dollar, energy bill savings (money not spent) is more valuable than the return on conventional investments such as stocks and treasury bonds (taxable income).
Your game plan
We hope this article convinced you that you can have your cake and eat it too — you can save money, improve your family's well-being, and help out the planet. We wish you the best with your upcoming power moves (pun intended).
Click HERE to see how much you can save by and installing solar panels. The Cut My Bill calculator is free and easy.
Find more about Rochester Gas & Electric electric rate plans.